Trouble-clearing procedures
EQPTDGR-OUT
....................................................................................................................................................................................................................................
WEBUI
...................................................................................................................................................................................................
3
Reseat the card. Refer to
...................................................................................................................................................................................................
Replace the card. Refer to
4
and repair process in the Customer and Product Support guide to return the faulty card to
an authorized repair center for replacement.
E
N D
O F
...................................................................................................................................................................................................
EQPTDGROCH-OUT
EQPTDGROCH-OUT (Port Degrade - Wavelength Tracker
Communication Failure)
Communications with the Wavelength Tracker feature on this card are unreliable. This
means that any Wavelength Tracker information sent (for example, configuration
changes) or generated may be incorrect.
Note: Until this alarm is cleared, Wavelength Tracker provisioning and information
on the card are invalid.
Severity
Service affecting?
Applicability
....................................................................................................................................................................................................................................
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
Select the card, click the
"Reseating a Card" (p.
"Replacing System Components" (p.
S T E P S
Minor
No
A2325A, AHPHG, AHPLG, ALPHG, ALPFGT, AM2017B,
AM2125A, AM2125B, AM2325B, CWR, OSC, OSCT, WTOCM
EQPTDGR-OUT (Port Degrade - Wavelength Tracker
Reboot
tab, select
Cold Reboot
3-19).
Communication Failure)
>
Submit
.
3-20). Follow the return
2-81