Alcatel-Lucent 1830 PSS-16 Maintenance And Trouble-Clearing User Manual page 623

Supporting procedures
Firmware
....................................................................................................................................................................................................................................
Procedure
A cold reset, reseat, or replacement of a card is service impacting if the card is currently
carrying services. To determine if any services are currently carried over a card, perform
the procedure
If there are services currently carried over the card, it may be best to wait for a
maintenance window before resetting, replacing, or reseating the card.
The following procedure is recommended when you want to avoid a firmware upgrade
and use/retain a specific firmware version.
At the end of each step wait to see if the fault clears. If not, continue with the next step.
...................................................................................................................................................................................................
1
CLI
WEBUI
...................................................................................................................................................................................................
Establish a particular release for the instance of the card in your system.
2
CLI
WEBUI
The system will reload this specific version rather than the default recommended version
on any subsequent cold reset of that card.
...................................................................................................................................................................................................
Perform a warm reset of the card.
3
CLI
WEBUI
This action will restart the software on the card (nonservice affecting), clearing the
FWUPGRADEPENDING condition.
....................................................................................................................................................................................................................................
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
NOTICE
Service-disruption hazard
"Reseating a Card" (p.
show firmware card shelf slot detail
Record the currently active firmware load (from the recently upgraded
release) as
active-release
Select the card, click the Firmware tab, and view the Active Release field.
config firmware card
Enter the desired release in the Provisioned Release field.
config card card type shelf slot reset warm
Select the card, click the
Selecting a Specific Firmware Version
3-19).
shelf slot active-release
Reboot tab, select Warm Reboot > Submit .
3-15