Alcatel-Lucent 1830 PSS-16 Maintenance And Trouble-Clearing User Manual page 391

Trouble-clearing procedures
LOF
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Perform a warm reset of the card of the transponder card.
8
CLI
WEBUI
...................................................................................................................................................................................................
Perform a cold reset of the card of the transponder card.
9
Note: Refer to Caution at the beginning of this procedure.
CLI
WEBUI
...................................................................................................................................................................................................
Reseat the card. Refer to
10
...................................................................................................................................................................................................
Replace the card. Refer to
11
and repair process in the Customer and Product Support guide to return the faulty card to
an authorized repair center for replacement.
E
N D O F
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
config card
Select the card, click the
config card
Select the card, click the
"Reseating a Card" (p.
"Replacing System Components" (p.
S T E P S
card type shelf slot
reset warm
tab, select
Reboot
card_type shelf slot
reset cold
tab, select
Reboot
3-19).
Transponder Network Port Loss of Frame
>
Warm Reboot Submit
>
Cold Reboot Submit
3-20). Follow the return
.
.
2-141