Table of Contents
Advertisement
2.3
TRP1000-4450-OD Installation
To allow for proper cooling of the TRP1000-4450, keep any mounting
obstructions least four inches away from the cooling fans and the end vents.
Also, do not install the unit in such a way that would cause the hot exhaust
air to return to the air inlet area.
As shown in Figure 2-5, mounting holes are are provided for rack or panel installation of the
TRP1000-4450. Several holes are available on the flat (bottom) surface of the TRP1000-4450 for
mounting/installation purposes. Contact Comtech EF Data if factory furnished mounting kits are
desired.
System Connections, Installation and Startup
Figure 2-5. TRP1000-4450-OD Mounting
2–7
TRP1000-4450 Troposcatter C-Band Outdoor Amplifier
Revision 0
MN-TRP1000-OD
Advertisement
Table of Contents
