Chapter 4. Ethernet-Based Remote Product Management - Comtech EF Data TRP1000-OD Installation And Operation Manual

Chapter 4. ETHERNET-BASED
4.1 Overview
This chapter describes the functionality of the TRP1000-4450 100BaseT/10BaseTx Ethernet
Management Interface. This interface is generally modeled after interface of Comtech EF Data's
other Solid State Power Amplifier product lines.
Refer to the Remote Commands Specifications tables found in Chapter 5. SERIAL-BASED
REMOTE PRODUCT MANAGEMENT for detailed descriptions of the configuration parameters
featured on the individual web pages depicted in this section.
4.2 Ethernet Management Interface Protocols
The user PC facilitates access to Ethernet-based remote M&C of the TRP1000-4450
100BaseT/10BaseTx Ethernet Management Interface through two separately operated protocols:
•
Telnet Interface. This requires use of the user PC's Command-line interface, or a user-
supplied terminal emulation program such as HyperTerminal.
•
TRP1000-4450 Web Server (HTTP) Interface. This requires a compatible user-supplied
web browser such as Internet Explorer.
•
Simple Network Management Protocol (SNMP). This requires a user-supplied Network
Management System (NMS) and a user-supplied Management Information Base (MIB) File
Browser.
Ethernet-based Remote Product Management
TRP1000-4450 Troposcatter C-Band Outdoor Amplifier
REMOTE PRODUCT
MANAGEMENT
4–1
Revision 0
MN-TRP1000-OD