Comtech EF Data TRP1000-OD Installation And Operation Manual page 101

Command
(Instruction
Parameter
Type Code and
or Response
Qualifier)
SNMP Trap STB= 15 bytes,
Destination Numerical
IP Address 2
SNMP STV= 1 byte
Trap Version
SNMP SWC= 16bytes,
Write characters,
no spaces
Community
Set RTC TIM= 6 bytes
Time
Serial-based Remote Product Management
Arguments
for
Description of Arguments
Command (Note that all arguments are ASCII
numeric codes between 48 and 57)
to Query
Command or Query.
Used to set the IP address of the first SNMP Trap destination
IP Address 2
Where traps will be sent, in the form:
xxx.xxx.xxx.xxx is the IP addresss
Example:
<1/STB=010.006.030.001
When not configured, returns >0001/STB=0.0.0.0
Command or Query.
SNMP Trap Version that will be used to send traps.
1=SNMP Trap Version 1
2=SNMP Trap Version 2
Example:
<1/STV=0
Command or Query.
SNMP write community string. Empty string is not allowed
Example:
<1/SWC=private
Command or Query.
A command in the form hhmmss, indicating the time from
midnight, where hh = hours, between 00 and 23; mm =
minutes, between 00 and 59, and ss = seconds, between 00
and 59
Example (time = 23 hours, 12 minutes and 59 seconds since
midnight):
<1/TIM=231259'cr'
>0001/TIM='cr''lf'
TRP1000-4450 Troposcatter C-Band Outdoor Amplifier
Response to
Command
(Target to
Controller)
STB =
STB!
STV =
STV!
SWC =
SWC!
TIM =
TIM?
TIM *
5–33
Revision 0
Query Response
(Instruction to Query
Code and (Target to
Qualifier) Controller)
STB=xxx.xx
STB?
x.xxx.xxx
(See
description
of
arguments)
STV? STV =x
(See
description
of
arguments)
SWC? SWC =x
(See
description
of
arguments)
TIM? TIM=xxxxxx
(Same
format as
command
arguments)
MN-TRP1000-OD