Multicast Access Control Configuration Example (For Portal) - HP VSR1000 Configuration Manual

User profile: profile1
Authorized programs list:
User name: user1@isp2
Access type: IPoE
Interface: Multicast-UA2
Access interface: GigabitEthernet1/0/5.2
VLAN ID: 2
Second VLAN ID: 2
Maximum programs for order: 4
User profile: profile2
Authorized programs list:

Multicast access control configuration example (for Portal)

As shown in
•
OSPF runs in the PIM-SM domain.
•
Source 1, Source 2, and Source 3 send multicast data to multicast groups 224.1.1.1, 225.1.1.1,
and 226.1.1.1, respectively.
•
GigabitEthernet 1/0/2 on Router A acts as a C-BSR and a C-RP, and it is designated to all
multicast groups.
•
Router A acts as the BRAS, and connects the users in ISP 1 and ISP 2 to the PIM-SM network.
Configure the multicast access control feature on Router A to meet the following requirements:
•
Host A and Host B in ISP 1 can join only multicast groups 224.1.1.1 and 225.1.1.1.
•
Host C and Host D in ISP 2 can join only multicast groups 225.1.1.1 and 226.1.1.1.
Figure 28:
68