Connecting The Mx150 To The Network; Connecting An Mx150 To A Network For Out-Of-Band Management; Figure 18: Connecting An Mx150 To A Network For Out-Of-Band Management - Juniper MX150 Hardware Manual

CHAPTER 12

Connecting the MX150 to the Network

Connecting an MX150 to a Network for Out-of-Band Management

Copyright © 2017, Juniper Networks, Inc.
Connecting an MX150 to a Network for Out-of-Band Management on page 89
Connecting an MX150 to a Management Console on page 90
Connecting an MX150 to a Management Console Using Mini-USB Type-B Console
Port on page 91
You can monitor and manage the MX150 by using a dedicated management channel.
The MX150 has one management port, eight 1-Gigabit Ethernet RJ-45 ports, two 1-Gigabit
Ethernet RJ-45 network or uplink ports, two 1-Gigabit Ethernet small form-factor pluggable
(SFP) ports, and two 1/10-Gigabit Ethernet SFP+ ports. Use the management port to
connect the MX150 device to a network for out-of-band management.
Ensure that you have an appropriate cable available.
To connect an MX150 to a network for out-of-band management (see
Figure 18 on page 90):
Connect one end of the cable to the management port (labeled
1.
Connect the other end of the cable to the management switch (see
2.
Figure 18 on page 90).
) on the MX150.
MGMT
89