Advertisement
MX150 3D Universal Edge Router Hardware Guide
Related
Documentation
98
You will see the following output (or something similar, depending on the hardware
being shut down):
user@host> request system halt
warning: This command will halt all the members.
If planning to halt only one member use the member option
Halt the system ? [yes,no] (no) yes
*** FINAL System shutdown message from user@host ***
System going down IMMEDIATELY
Shutdown NOW!
[pid 14102]
message sent
{master:0}
user@host> Waiting (max 300 seconds) for system process `vnlru' to stop...done
Waiting (max 300 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 300 seconds) for system process `bufdaemon' to stop...done
Waiting (max 300 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 3 1 2 2 0 0 0 0 done
syncing disks... All buffers synced.
Uptime: 38d18h0m6s
recorded reboot as normal shutdown
The operating system has halted.
Please press any key to reboot
CAUTION:
The final output of any version of this command is the "The
operating system has halted. Please press any key to reboot" message.
Wait at least 60 seconds after first seeing this message before following
the instructions in Step 3 and Step 4 to power off the device.
CAUTION:
Ensure that you have halted your system safely before turning
off the power supply.
Attach the ESD grounding strap to your bare wrist and connect the strap to the ESD
3.
point on the chassis.
Set the power switch to off (
4.
Connecting AC Power to an MX150 on page 86
) position.
0
Copyright © 2017, Juniper Networks, Inc.
Advertisement
Chapters
