Juniper MX150 Hardware Manual page 100

MX150 3D Universal Edge Router Hardware Guide
Related
Documentation
84
Slide the rear mounting blades into the front-mounting brackets.
8.
Attach the rear mounting blades to the rear post by using the appropriate screws for
9.
your rack. Tighten the screws.
Ensure that the chassis is level by verifying that all the screws on the front of the rack
10.
are aligned with the screws at the back of the rack.
Connecting Earth Ground to an MX150 on page 85
Connecting AC Power to an MX150 on page 86
Rack-Mounting and Cabinet-Mounting Warnings on page 132
Copyright © 2017, Juniper Networks, Inc.