Advertisement
MX150 3D Universal Edge Router Hardware Guide
Related
Documentation
Action to Take After an Electrical Accident
Related
Documentation
150
Evaluated to the TN power system.
Canada—Canadian Electrical Code, Part 1, CSA C22.1.
Locate the emergency power-off switch for the room in which you are working so that
if an electrical accident occurs, you can quickly turn off the power.
Make sure that grounding surfaces are cleaned and brought to a bright finish before
grounding connections are made.
Do not work alone if potentially hazardous conditions exist anywhere in your workspace.
Never assume that power is disconnected from a circuit. Always check the circuit before
starting to work.
Carefully look for possible hazards in your work area, such as moist floors, ungrounded
power extension cords, and missing safety grounds.
Operate the device within marked electrical ratings and product usage instructions.
To ensure that the device and peripheral equipment function safely and correctly, use
the cables and connectors specified for the attached peripheral equipment, and make
certain they are in good condition.
You can remove and replace many device components without powering off or
disconnecting power to the device, as detailed elsewhere in the hardware documentation
for this device. Never install equipment that appears to be damaged.
General Safety Guidelines and Warnings on page 121
AC Power Electrical Safety Guidelines on page 152
DC Power Electrical Safety Guidelines for Switches
If an electrical accident results in an injury, take the following actions in this order:
Use caution. Be aware of potentially hazardous conditions that could cause further
1.
injury.
Disconnect power from the device.
2.
If possible, send another person to get medical aid. Otherwise, assess the condition
3.
of the victim, then call for help.
General Safety Guidelines and Warnings on page 121
General Electrical Safety Guidelines and Warnings on page 149
AC Power Electrical Safety Guidelines on page 152
DC Power Electrical Safety Guidelines for Switches
Copyright © 2017, Juniper Networks, Inc.
Advertisement
Chapters
