Download Print this page

Electrical Safety Guidelines And Warnings; General Electrical Safety Guidelines And Warnings; Copyright © 2017, Juniper Networks, Inc - Juniper MX150 Hardware Manual

3d universal edge router
Hide thumbs Also See for MX150:

Advertisement

CHAPTER 24

Electrical Safety Guidelines and Warnings

General Electrical Safety Guidelines and Warnings

TN Power Warning on page 154
WARNING:
Certain ports on the device are designed for use as intrabuilding
(within-the-building) interfaces only (Type 2 or Type 4 ports as described in
GR-1089-CORE) and require isolation from the exposed outside plant (OSP)
cabling. To comply with NEBS requirements and protect against lightning
surges and commercial power disturbances, the intrabuilding ports must not
be metallically connected to interfaces that connect to the OSP or its wiring.
The intrabuilding ports on the device are suitable for connection to
intrabuilding or unexposed wiring or cabling only. The addition of primary
protectors is not sufficient protection for connecting these interfaces
metallically to OSP wiring.
CAUTION:
Before removing or installing components of a device, attach an
electrostatic discharge (ESD) grounding strap to an ESD point and place the
other end of the strap around your bare wrist. Failure to use an ESD grounding
strap could result in damage to the device.
Install the device in compliance with the following local, national, and international
electrical codes:
United States-National Fire Protection Association (NFPA 70), United States
National Electrical Code.
through Part 7.
149

Advertisement

Chapters

loading