Connecting An Mx150 To A Management Console - Juniper MX150 Hardware Manual

MX150 3D Universal Edge Router Hardware Guide
Related
Documentation

Connecting an MX150 to a Management Console

90
Figure 18: Connecting an MX150 to a Network for Out-of-Band
Management
Front Panel of an MX150 on page 5
Connecting an MX150 to a Management Console on page 90
MX150 has a console port with an RJ-45 connector. Use the console port to connect the
device to a management console or to a console server.
Ensure that you have an RJ-45 to DB-9 rollover cable available. An RJ-45 cable with an
RJ-45 to DB-9 adapter is provided with the device.
NOTE: If your laptop or PC does not have a DB-9 male connector pin and you
want to connect your laptop or PC directly to the MX150, use a combination
of the RJ-45 cable and RJ-45 to DB-9 adapter supplied with the device and
a USB to DB-9 male adapter. You must provide the USB to DB-9 male adapter.
To connect the MX150 to a management console (see
Figure 20 on page 91):
Connect one end of the Ethernet cable to the console port (labeled
1.
Connect the other end of the Ethernet cable into the console server (see
2.
Figure 19 on page 91) or management console (see
Figure 19 on page 91 and
CON ).
Figure 20 on page 91).
Copyright © 2017, Juniper Networks, Inc.