Advertisement
MX150 3D Universal Edge Router Hardware Guide
Table 9: Site Preparation Checklist (continued)
Item or Task
Choose the number of devices you want to
install.
Rack or Cabinet
Verify that your rack or cabinet meets the
minimum requirements for the installation of
the device.
Plan rack or cabinet location, including required
space clearances.
Secure the rack or cabinet to the floor and
building structure.
Desk
Verify that the desk meets the minimum
requirements for the installation of the device.
Verify that there is appropriate clearance in your
selected location.
Wall
Verify that there is appropriate clearance in your
selected location.
Cables
Acquire cables and connectors:
Determine the number of cables needed
based on your planned configuration.
Review the maximum distance allowed for
each cable. Choose the length of cable based
on the distance between the hardware
components being connected.
Plan the cable routing and management.
Related
Documentation
20
For More Information
"MX150 Router Overview" on page 3
"Rack Requirements for an MX150"
on page 23
"Cabinet Requirements for an MX150"
on page 24
"Clearance Requirements for Airflow
and Hardware Maintenance for an
MX150" on page 25
"Requirements for Mounting an
MX150 on a Desktop or Other Level
Surface" on page 23
"Clearance Requirements for Airflow
and Hardware Maintenance for an
MX150" on page 25
"Clearance Requirements for Airflow
and Hardware Maintenance for an
MX150" on page 25
General Safety Guidelines and Warnings on page 121
General Site Guidelines on page 21
Installing and Connecting an MX150 on page 77
Mounting an MX150 on page 78
Performed by
Date
Copyright © 2017, Juniper Networks, Inc.
Advertisement
Chapters
