Network Port Connector Pinout Information For An Mx150; Table 18: Rj-45 Management Port Connector Pinouts For The Mx150; Table 19: Network Port Connector Pinout Information For The Mx150 - Juniper MX150 Hardware Manual

MX150 3D Universal Edge Router Hardware Guide

Table 18: RJ-45 Management Port Connector Pinouts for the MX150

Pin
1
2
3
4
5
6
7
8
Related
Documentation

Network Port Connector Pinout Information for an MX150

Table 19: Network Port Connector Pinout Information for the MX150

Pin
1
2
3
4
34
Signal
TRP1+
TRP1–
TRP2+
TRP3+
TRP3–
TRP2–
TRP4+
TRP4–
Management Port LEDs on MX150 on page 10
A network port on an MX150 uses an RJ-45 connector to connect to a device.
The port uses an autosensing RJ-45 connector to support a 10/100/1000Base-T
connection. Two LEDs on the port indicate link activity on the port and the port status.
See "Network Port and Uplink Port LEDs on MX150" on page
Table 19 on page 34 provides the pinout information for the RJ-45 connector. An RJ-45
cable, with a connector attached, is supplied with the switch.
Signal
TRP1+
TRP1-
TRP2+
TRP3+
Description
Transmit/receive data pair 1
Transmit/receive data pair 1
Transmit/receive data pair 2
Transmit/receive data pair 3
Transmit/receive data pair 3
Transmit/receive data pair 2
Transmit/receive data pair 4
Transmit/receive data pair 4
8.
Description
Transmit/receive data pair 1
Negative Vport (in PoE models)
Transmit/receive data pair 1
Negative Vport (in PoE models)
Transmit/receive data pair 2
Positive Vport (in PoE models)
Transmit/receive data pair 3
Copyright © 2017, Juniper Networks, Inc.