Configuring Fuzzy Telephone Number Registration - HP FlexNetwork MSR Series Configuration Manual

Step
1. Enter system view.
2. Enter voice view.
3. Enter SIP client view.
4. Enable call failure-triggered
re-registration.

Configuring fuzzy telephone number registration

Fuzzy telephone number registration refers to the use of a wildcard (including the dot . and the
character T), rather than a standard E.164 number in the match template of a POTS entity.
After enabling fuzzy telephone number registration, the voice gateway (router) retains dots and
substitutes asterisks (*) for Ts when sending REGISTER messages.
To configure fuzzy telephone number registration:
Step
1. Enter system view.
2. Enter voice view.
3. Enter SIP client view.
4. Enable fuzzy (wildcard)
telephone number
registration.
NOTE:
To use the fuzzy telephone number registration function, make sure the registrar and the location
server also support the function.
Enabling SIP registration function
Step
1. Enter system view.
2. Enter voice view.
3. Enter SIP client view.
4. Enable the SIP registration
function.
5. Enable checking the status
of voice subscriber lines
associated with POTS voice
entities.
Command
system-view
voice-setup
sip
call-fallback register
Command
system-view
voice-setup
sip
wildcard-register enable
Command
system-view
voice-setup
sip
register-enable on
line-check enable
143
Remarks
N/A
N/A
N/A
Optional.
Not enabled by default.
Remarks
N/A
N/A
N/A
Disabled by default.
Remarks
N/A
N/A
N/A
Disabled by default.
Optional.
By default, before registering
numbers for a POTS voice entity,
the device checks the status of
the voice subscriber line
associated to the POTS voice
entity. The device can send
REGISTER requests for numbers
only when the status of the line is
up.