HP FlexNetwork MSR Series Configuration Manual page 351

Configuration prerequisites
You have configured an access number.
Configuration procedure
To enable the authentication function for two-stage dialing users:
Step
1. Enter system view.
2. Enter voice view.
3. Enter dial program view.
4. Enter access number view.
5. Enable the authentication function for
two-stage dialing users.
Enabling the authorization function for two-stage dialing
users
Before enabling the authorization function, make sure:
•
The RADIUS server and the RADIUS client can communicate with each other at the network
layer.
•
Access numbers have been configured and the authentication function has been enabled on
the RADIUS server.
•
A list of user authorities as well as authorization policies has been configured on the RADIUS
server.
Configuration prerequisites
You have configured an access number.
Before enabling the authorization function, make sure the RADIUS server and the RADIUS client
can communicate with each other at the network layer, and that a list of corresponding two-stage
dialing users as well as authorization policies has been configured on the RADIUS server.
Authentication is a prerequisite for authorization. The authentication function must be enabled before
the authorization function. If the authentication function is disabled, the authorization function will
automatically be disabled. In terms of command configuration steps, the authorization command
follows the authentication command. If the authentication function is actually not enabled, the
authorization command is unavailable.
The authorization function for two-stage dialing users is enabled for a specific access number, while
the authorization function for one-stage dialing users is enabled in voice AAA client view.
Configuration procedure
To enable the authorization function for two-stage dialing users:
Step
1. Enter system view.
2. Enter voice view.
3. Enter dial program view.
Command
system-view
voice-setup
dial-program
gw-access-number
access-number
authentication
Command
system-view
voice-setup
dial-program
338
Remarks
N/A
N/A
N/A
N/A
Disabled by default.
Remarks
N/A
N/A
N/A