Configuring Feature Service By Using Command Lines - HP FlexNetwork MSR Series Configuration Manual

Configuring Feature service by using command lines

The feature service indicates the service that is used together with the VCX. When you need to
interact with the VCX by using telephone keys, you need to adopt out-of-band named telephone
event (NTE) transmission to send the DTMF digits to the VCX. The execution of the feature permit
command does not enable out-of-band NTE transmission, and you need to execute the outband nte
command on the called entity to enable it. For more information about out-of-band NTE transmission,
see "Configuring voice entities."
To configure the Feature service:
Step
1. Enter system view.
2. Enter voice subscriber line
view.
3. Configure the feature
service.
Configuration example
The system is connected with a VCX. The subscriber at Telephone A wants to implement the Feature
service provided by the VCX.
# Enter voice subscriber line view.
<Sysname> system-view
[Sysname] subscriber-line 1/0
# Enable the setting of the Feature service for the voice subscriber line.
[Sysname-subscriber-line1/0] feature permit
Configuring a number priority peer
To configure a number priority peer:
Step
1. Enter system view.
2. Enter voice view.
3. Enter voice dial program
view.
4. Configure the
number-priority peer.
After the number-priority peer enable command is configured, a dialed number will match first
against a voice entity match template and then a service feature code. For example, if a service
feature code is *40*1234 and the match template *40 is configured for a voice entity, *40*1234 dialed
by a subscriber will first match the number template *40 (*40 is dialed out as the called number), and
the feature corresponding to the service feature code *40*1234 will not be triggered.
Command
system-view
subscriber-line line-number
feature { deny | permit }
Command
system-view
voice-setup
dial-program
number-priority peer enable
248
Remarks
N/A
N/A
deny by default.
Remarks
N/A
N/A
N/A
Optional.
By default, a number starting with
an asterisk (*) or a pound sign (#)
will first match against a service
feature code.