Configuring The Voice Entity Search Function; Configuration Example Of The Voice Entity Search Function - HP FlexNetwork MSR Series Configuration Manual

[RouterB-voice-dial] entity 2000 pots
[RouterB-voice-dial-entity2000] match-template 20001234$
[RouterB-voice-dial-entity2000] line 1/0
3. Configure different voice entity type selection priority rules:
Configure the system to select voice entities in order of VoIP->POTS->VoFR->IVR.
<RouterA> system-view
[RouterA] voice-setup
[RouterA-voice] dial-program
[RouterA-voice-dial] select-rule type-first
After Telephone A dials 20001234, the number will match VoIP entity 2000.
Configure the system to select voice entities in order of POTS->VoIP->VoFR->IVR.
<RouterA> system-view
[RouterA] voice-setup
[RouterA-voice] dial-program
[RouterA-voice-dial] select-rule type-first
After Telephone A dials 20001234, the number will match POTS entity 1001.

Configuring the voice entity search function

Step
1. Enter system view.
2. Enter voice view.
3. Enter voice dial program
view.
4. Configure the maximum
number of voice entities
found before a search
process stops.
5. Enter voice entity view.
6. Disable the voice entity
search function.

Configuration example of the voice entity search function

Figure 31
and the following describe the configurations for the voice entity search function on Router
A and Router B.
Figure 31 Network diagram
1. Configure Router A:
<RouterA> system-view
Command
system-view
voice-setup
dial-program
select-rule search-stop
max-number
entity entity-number { pots | ivr |
vofr | voip }
select-stop
112
2 1 3 4
1 2 3 4
Remarks
N/A
N/A
N/A
Optional.
By default, the maximum number
of voice entities found before a
search process stops is 128.
N/A
Optional.
By default, the voice entity search
function is enabled.