HP FlexNetwork MSR Series Configuration Manual page 108
Hide thumbs
Also See for FlexNetwork MSR Series:
- Command reference manual (1005 pages) ,
- Configuration manuals (159 pages)
Table of Contents
Advertisement
[RouterA-Ethernet2/1] ip address 1.1.1.1 255.255.255.0
[RouterA-Ethernet2/1] quit
# Create an ISDN PRI group on interface E1 1/1.
[RouterA] system-view
[RouterA] controller e1 1/1
[RouterA-E1 1/1] pri-set
# Create a POTS voice entity for the FXS interface.
[RouterA] system-view
[RouterA] voice-setup
[RouterA-voice] dial-program
[RouterA-voice-dial] entity 1003 pots
# Configure a target match-template pointing to telephone number 010-1003 for the POTS
voice entity.
[RouterA-voice-dial-entity1003] match-template 0101003
# Associate the POTS voice entity with FXS subscriber line 3/0.
[RouterA-voice-dial-entity1003] line 3/0
[RouterA-voice-dial-entity1003] quit
# Create a POTS voice entity for the ISDN PRI interface.
[RouterA-voice-dial] entity 1001 pots
# Configure a target match-template pointing to telephone number 010-1001 for the POTS
voice entity.
[RouterA-voice-dial-entity1001] match-template 0101001
# Associate the POTS voice entity with subscriber line 1/1:15.
[RouterA-voice-dial-entity1001] line 1/1:15
[RouterA-voice-dial-entity1001] send-number all
[RouterA-voice-dial-entity1001] quit
# Create a POTS voice entity for the ISDN PRI interface.
[RouterA-voice-dial] entity 1002 pots
# Configure a target match-template pointing to telephone number 010-1002 for the POTS
voice entity.
[RouterA-voice-dial-entity1002] match-template 0101002
# Associate the POTS voice entity with subscriber line 1/1:15.
[RouterA-voice-dial-entity1002] line 1/1:15
[RouterA-voice-dial-entity1002] send-number all
[RouterA-voice-dial-entity1002] quit
# Create a VoIP voice entity.
[RouterA-voice-dial] entity 0755 voip
# Configure a target match-template for the VoIP voice entity.
[RouterA-voice-dial-entity755] match-template 0755....
# Configure the target address of the VoIP voice entity.
[RouterA-voice-dial-entity755] address ip 2.2.2.2
2.
Configure Router B:
# Configure the IP address 2.2.2.2/24 for the interface Ethernet 2/1.
<RouterB> system-view
[RouterB] interface ethernet 2/1
[RouterB-Ethernet2/1] ip address 2.2.2.2 255.255.255.0
[RouterB-Ethernet2/1] quit
95
Advertisement
Table of Contents
Troubleshooting
