HP FlexNetwork MSR Series Configuration Manual page 339

[RouterA-voice-dial] entity 1001 pots
[RouterA-voice-dial-entity1001] match-template 0101001
[RouterA-voice-dial-entity1001] line 2/0
2. Configure Router B:
# Create a new frame relay class VoFR.
<RouterB> system-view
[RouterB] fr class vofr
# Configure the voice bandwidth.
[RouterB-fr-class-vofr] voice bandwidth 32000 reserved
# Configure the fragment size of data packets in the case that the voice function is disabled.
[RouterB-fr-class-vofr] fragment 200 data-level
# Configure the fragment size of data packets in the case that the voice function is enabled.
[RouterB-fr-class-vofr] fragment 100 voice-level
[RouterB-fr-class-vofr] quit
# Enter interface Serial 1/0 view and configure the encapsulation format and the IP address.
[RouterB] interface serial 1/0
[RouterB-Serial1/0] link-protocol fr ietf
[RouterB-Serial1/0] ip address 2.2.2.2 255.255.255.0
# Configure a frame relay address mapping and enable traffic shaping.
[RouterB-Serial1/0] fr map ip 1.1.1.1 100
[RouterB-Serial1/0] fr traffic-shaping
# Set the interface type to DCE.
[RouterB-Serial1/0] fr interface-type dce
# Configure a frame relay DLCI and set the frame relay class to VoFR.
[RouterB-Serial/0] fr dlci 100
[RouterB-fr-dlci-Serial1/0-100] fr-class vofr
# Specify the call control protocol to be used by DLCI 100 as Huawei-compatible (DCE).
[RouterB-fr-dlci-Serial1/0-100] vofr huawei-compatible dce
[RouterB-fr-dlci-Serial1/0-100] quit
[RouterB-Serial1/0] quit
# Configure the VoFR entity (0101001).
[RouterB] voice-setup
[RouterB-voice] dial-program
[RouterB-voice-dial] entity 010 vofr
[RouterB-voice-dial-entity10] match-template 0101001
[RouterB-voice-dial-entity10] address vofr-dynamic serial 1/0 100
[RouterB-voice-dial-entity10] quit
# Configure the local POTS entity (07552001).
[RouterB-voice-dial] entity 2001 pots
[RouterB-voice-dial-entity2001] match-template 07552001
[RouterB-voice-dial-entity2001] line 2/0
326