HP FlexNetwork MSR Series Configuration Manual page 126

[RouterA] voice-setup
[RouterA-voice] dial-program
# Configure POTS entity 1000.
[RouterA-voice-dial] entity 1000 pots
[RouterA-voice-dial-entity1000] match-template 10001234$
[RouterA-voice-dial-entity1000] line 1/0
[RouterA-voice-dial-entity1000] quit
# Configure VoIP entities 2000, 2001, and 2002.
[RouterA-voice-dial] entity 2000 voip
[RouterA-voice-dial-entity2000] match-template 20001234$
[RouterA-voice-dial-entity2000] address sip ip 1.1.1.2
[RouterA-voice-dial-entity2000] quit
[RouterA-voice-dial] entity2001 voip
[RouterA-voice-dial-entity2001] match-template 2000123.$
[RouterA-voice-dial-entity2001] address sip ip 1.1.1.2
[RouterA-voice-dial-entity2001] quit
[RouterA-voice-dial] entity 2002 voip
[RouterA-voice-dial-entity2002] match-template T
[RouterA-voice-dial-entity2002] address sip ip 1.1.1.2
[RouterA-voice-dial-entity2002] quit
2. Configure Router B:
<RouterB> system-view
[RouterB] voice-setup
[RouterB-voice] dial-program
# Configure POTS entity 2000.
[RouterB-voice-dial] entity 2000 pots
[RouterB-voice-dial-entity2000] match-template 20001234$
[RouterB-voice-dial-entity2000] line 1/0
3. Set the maximum number of voice entities found before a search process stops to 2.
<RouterA> system-view
[RouterA] voice-setup
[RouterA-voice] dial-program
[RouterA-voice-dial] select-rule search-stop 2
After Telephone dials 20001234, the number will match VoIP entity 2000 by default. You can use the
display voice call-info verbose command to view the other voice entities that meet the matching
conditions.
[RouterA-voice-dial] display voice call-info verbose
The information table for current calls in detail
#
**************** CALL 0 ***************
Call direction
ViIfIndex
Related module ==>
Module ID
Reference Numbers : 1
Module ID
Reference Numbers : 1
Current used voice entity : 2000
: From CS
: 0x002C0060
: LGS
: CMC
113