HP FlexNetwork MSR Series Configuration Manual page 275
Hide thumbs
Also See for FlexNetwork MSR Series:
- Command reference manual (1005 pages) ,
- Configuration manuals (159 pages)
Table of Contents
Advertisement
After the above configuration, Telephone C with the number 3000 can monitor and barge in the
conversations of Telephone A with the number 1000.
2.
Configure Router A:
# Configure VoIP voice entities to Router B and Router C.
<RouterA> system-view
[RouterA] voice-setup
[RouterA-voice] dial-program
[RouterA-voice-dial] entity 3000 voip
[RouterA-voice-dial-entity3000] address sip proxy
[RouterA-voice-dial-entity3000] match-template 3000
[RouterA-voice-dial-entity3000] quit
[RouterA-voice-dial] entity 2000 voip
[RouterA-voice-dial-entity2000] address sip proxy
[RouterA-voice-dial-entity2000] match-template 2000
[RouterA-voice-dial-entity2000] quit
# Configure a POTS voice entity, that is, configure the number of Telephone A as 1000.
[RouterA-voice-dial] entity 1000 pots
[RouterA-voice-dial-entity1000] line 1/0
[RouterA-voice-dial-entity1000] match-template 1000
[RouterA-voice-dial-entity1000] quit
[RouterA-voice-dial] quit
[RouterA-voice] quit
# Enable three-party conference in active participation mode.
[RouterA] subscriber-line 1/0
[RouterA-subscriber-line1/0] joined-conference enable
# Enable the setting of the Feature service.
[RouterA-subscriber-line1/0] feature permit
[RouterA-subscriber-line1/0] quit
# Specify the IP address 100.1.1.101 as the registrar and proxy server and enable the registrar.
[RouterA-voice] sip
[RouterA-voice-sip] registrar ipv4 100.1.1.101
[RouterA-voice-sip] proxy ipv4 100.1.1.101
[RouterA-voice-sip] register-enable on
3.
Configure Router B:
# Configure VoIP voice entities to Router A and Router C.
<RouterB> system-view
[RouterB] voice-setup
[RouterB-voice] dial-program
[RouterB-voice-dial] entity 1000 voip
[RouterB-voice-dial-entity1000] address sip proxy
[RouterB-voice-dial-entity1000] match-template 1000
[RouterB-voice-dial-entity1000] quit
[RouterB-voice-dial] entity 3000 voip
[RouterB-voice-dial-entity3000] address sip proxy
[RouterB-voice-dial-entity3000] match-template 3000
[RouterB-voice-dial-entity3000] quit
# Configure a POTS voice entity, that is, configure the number of Telephone B as 2000.
262
Advertisement
Table of Contents
Troubleshooting
