HP FlexNetwork MSR Series Configuration Manual page 70
Hide thumbs
Also See for FlexNetwork MSR Series:
- Command reference manual (1005 pages) ,
- Configuration manuals (159 pages)
Table of Contents
Advertisement
[RouterA-voice-dial] entity 210 voip
[RouterA-voice-dial-entity210] match-template 210....
[RouterA-voice-dial-entity210] address sip ip 192.168.0.76
[RouterA-voice-dial-entity210] quit
# Configure a POTS entity for the FXS voice subscriber line.
[RouterA-voice-dial] entity 0101001 pots
[RouterA-voice-dial-entity101001] match-template 0101001
[RouterA-voice-dial-entity101001] line 6/24
[RouterA-voice-dial-entity101001] quit
# Configure a backup POTS entity on the FXO voice subscriber line, set the match template
to .T, enable the sending of all digits of a called number, and configure a calling number
permitted to originate calls to the POTS entity.
[RouterA-voice-dial] entity 211 pots
[RouterA-voice-dial-entity211] match-template .T
[RouterA-voice-dial-entity211] line 6/0
[RouterA-voice-dial-entity211] send-number all
[RouterA-voice-dial-entity211] caller-permit 0101001
[RouterA-voice-dial-entity211] quit
[RouterA-voice-dial] quit
[RouterA-voice] quit
# Configure the PLAR function and the delay off-hook binding.
[RouterA] subscriber-line 6/0
[RouterA-subscriber-line6/0] private-line 0101001
[RouterA-subscriber-line6/0] hookoff-mode delay bind 6/24
[RouterA-subscriber-line6/0] quit
# Configure a dial plan where the VoIP entity is preferred.
[RouterA] voice-setup
[RouterA-voice] dial-program
[RouterA-voice-dial] select-rule type-first 2 1 3 4
2.
Configure Router B:
<RouterB> system-view
[RouterB] voice-setup
[RouterB-voice] dial-program
# Configure a VoIP entity for IP calls and set the match template to 010....
[RouterB-voice-dial] entity 010 voip
[RouterB-voice-dial-entity10] match-template 010....
[RouterB-voice-dial-entity10] address sip ip 192.168.0.71
[RouterB-voice-dial-entity10] quit
# Configure a POTS entity on the FXS voice subscriber line.
[[RouterB-voice-dial] entity 2101002 pots
[RouterB-voice-dial-entity2101002] match-template 2101002
[RouterB-voice-dial-entity2101002] line 6/24
[RouterB-voice-dial-entity2101002] quit
# Configure a backup POTS entity on the FXO voice subscriber line, set the match template
to .T, enable the sending of all digits of a called number, and configure a calling number
permitted to originate calls to the POTS entity.
[RouterB-voice-dial] entity 011 pots
[RouterB-voice-dial-entity11] match-template .T
57
Advertisement
Table of Contents
Troubleshooting
