Call Services Configuration Task List - HP FlexNetwork MSR Series Configuration Manual

three-party conference can be held. In this example, C is called the active participant of the
conference, A is the voice mixer, and B is the original participant of the conversation.
Silent monitor and barge in services can be considered as the extensions of three-party conference.
To distinguish them with traditional three-party conference, these two services are called three-party
conference in active participation mode.
Calling party control
The calling party control service allows the called party to resume the conversation with the calling
party by picking up the phone within the specified time. For example, subscriber A is the calling party;
subscriber B is the called party. The on-hook delay is set to m seconds on the voice subscriber line of
subscriber B. After the call between A and B is established, if the calling party A hangs up first, the
call is ended up. If the called party B hangs up first, it can resume the call with A by picking up the
phone within m seconds. After that, no matter how many times B hangs up within m seconds, it can
resume the call with A by picking up the phone.
In this example, after B hangs up for the first time, A hears silent tones from the headphone within m
seconds. If subscriber C dials subscriber B during this time, the telephone of B will not ring, and C will
hear busy tones.
Door opening control
The door opening control service allows a user to open a door remotely. The process is as follows:
1. User A who wants to enter a door calls user B.
2. After the session is established, user B enters a password starting with an asterisk (*) and
ending with a pound (#) on the phone:
If the entered password is correct (the password matches the predefined door opening
control password for the voice subscriber line), the door control relay opens the door. After a
predefined door open duration, the door control relay will lock the door automatically.
If the entered password is incorrect, the door cannot be opened.
Support for SIP voice service of VCX
Together with a server, the VCX implements the application of multiple voice features such as Silent
Monitor, Camp On, and FwdMail Toggle by using proprietary SIP messages of Hewlett Packard
Enterprise. All these voice features are called Feature service.
Hardware compatibility with call services
Call services are not available on the following routers:
•
MSR900.
•
MSR93X.
•
MSR1000.
•
MSR30-11E.
•
MSR30-11F.

Call services configuration task list

For the service features of call waiting, call forwarding, incoming call barring, and outgoing call
barring, the system supports the following configuration methods:
229