Show Line - SMC Networks E21011 User Manual

This command restarts the system or restores the factory default settings.
reset
S
YNTAX
reset <board | configuration>
board - Reboots the system.
configuration - Resets the configuration settings to the factory
defaults, and then reboots the system.
D S
EFAULT ETTING
None
C M
OMMAND
Exec
C U
OMMAND
When the system is restarted, it will always run the Power-On Self-Test.
E
XAMPLE
This example shows how to reset the system:
AP#reset board
Please wait a moment...
This command displays the console port's configuration settings.

show line

C M
OMMAND
Exec
E
XAMPLE
The console port settings are fixed at the values shown below.
AP#show line
Console Line Information
======================================================
databits
parity
speed
stop bits
======================================================
AP#
ODE
SAGE
ODE
: 8
: none
: 115200
: 1
– 121 –
| General Commands
C 12
HAPTER