Show Line; System Management Commands - SMC Networks 2555W-AG2 User Manual

show line

This command displays the console port's configuration settings.
Command Mode
Exec
Example
The console port settings are fixed at the values shown below.
Enterprise AP#show line
Console Line Information
======================================================
databits : 8
parity : none
speed : 9600
stop bits : 1
======================================================
Enterprise AP#

System Management Commands

These commands are used to configure the user name, password, system logs,
browser management options, clock settings, and a variety of other system
information.
Command
Country Setting
country
Device Designation
prompt
system name
snmp-server contact
snmp-server location
Management Access
username
password
ip ssh-server enable
ip ssh-server port
ip telnet-server enable Enables the Telnet server
APmgmtIP
APmgmtUI
show APmanagement Shows the AP management configuration
Table 7-4. System Management Commands
Function
Sets the access point country code
Customizes the command line prompt
Specifies the host name for the access point
Sets the system contact string
Sets the system location string
Configures the user name for management access
Specifies the password for management access
Enables the Secure Shell server
Sets the Secure Shell port
Specifies an IP address or range of addresses allowed
access to the management interface
Enables or disables SNMP, Telnet or web management
access
System Management Commands
Mode
Exec
GC
GC
GC
GC
GC
GC
IC-E
IC-E
IC-E
GC
GC
Exec
7
Page
7-12
7-14
7-14
7-40
7-41
7-15
7-15
7-16
7-16
7-17
7-20
7-21
7-21
7-11