Show Ntp Access-Groups - Cisco Nexus 7000 Series Reference Manual

show ntp access-groups

show ntp access-groups
To display the Network Time Protocol (NTP) access group configuration, use the show ntp
access-groups command.
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to display the NTP access group configuration:
switch(config)# show ntp access-groups
--------------------------------------
Access List
--------------------------------------
Admin_Group_123
switch(config)#
Related Commands Command
ntp access-group peer
Cisco Nexus 7000 Series NX-OS System Management Command Reference
562
show ntp access-groups
Modification
This command was introduced.
Description
Configures an NTP access group.
Type
Peer
Show Commands
OL-25806-03