Logging Message Interface Type Ethernet Description - Cisco Nexus 7000 Series Reference Manual

L Commands

logging message interface type ethernet description

To add the description for physical Ethernet interfaces and subinterfaces in the system message log, use
the logging message interface type ethernet description command. To disable the printing of the
interface description for physical Ethernet interfaces in the system message log, use the no form of this
command.
Syntax Description This command does not have any arguments or password.
Defaults None
Command Modes
Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
Make sure that you are in the correct VDC. To change the VDC, use the switchto vdc command.
This command does not require a license.
Examples
This example shows how to add the description for physical Ethernet interfaces and subinterfaces in the
system message log:
switch# configure terminal
switch(config)# logging message interface type ethernet description
OL-25806-03
logging message interface type ethernet description
no logging message interface type ethernet description
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
logging message interface type ethernet description
251