Ethanalyzer Local Read - Cisco Nexus 7000 Series Reference Manual

E Commands

ethanalyzer local read

To read packets captured by Ethanalyzer, use the ethanalyzer local read command. To stop reading the
packet capture, use the no form of this command.
Syntax Description location
Defaults None
Command Modes Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines Cisco Ethanalyzer is based on the Wireshark open source code.
This command does not require a license.
Examples This example shows how to capture all packets on the mgmt 0 port:
switch# ethanalyzer local read bootflash:test-mgmt0
#
Related Commands Command
ethanalyzer local
interface
OL-25806-03
ethanalyzer local read location
no ethanalyzer local read location
Location to read captured packets from. The location can be any
case-sensitive, alphanumeric string up to 64 characters.
Modification
This command was introduced.
Description
Captures packets to or from the supervisor or mgmt0 port.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
ethanalyzer local read
141