Cisco Nexus 7000 Series Reference Manual page 585

Show Commands
This example shows how to display information for a specific module:
switch# show module 7
Mod
---
7
Mod
---
7
Mod
---
7
Mod
---
7
Chassis Ejector Support: Enabled
Ejector Status:
Left ejector CLOSE, Right ejector CLOSE, Module HW does not support ejector based shutdo
wn.
switch#
This example shows how to display information for the fabric modules:
switch# show module xbar
Xbar Ports
---
1
Xbar Sw
---
1
Xbar MAC-Address(es)
---
1
* this terminal session
switch#
Related Commands Command
show hardware
show inventory
show diagnostic events
OL-25806-03
Ports Module-Type
----- -------------------------------- ------------------ ------------
48 1000 Mbps Optical Ethernet Modul N7K-M148GS-11
Sw Hw
-------------- ------
4.1(3) 0.202
MAC-Address(es)
--------------------------------------
00-1b-54-c2-ed-d0 to 00-1b-54-c2-ee-04
Online Diag Status
------------------
Pass
Module-Type
----- -------------------------------- ------------------ ------------
0 Fabric Module 1
Hw
-------------- ------
NA 0.101
--------------------------------------
NA
Description
Displays information about the hardware.
Displays hardware inventory information.
Displays diagnostic events by error and information event type.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
Model Status
ok
Serial-Num
----------
JAF1219AGFE
Model Status
N7K-C7018-FAB-1 ok
Serial-Num
----------
JAF1225AGHJ
show module
557