Transport Http Proxy Server - Cisco Nexus 7000 Series Reference Manual

transport http proxy server

transport http proxy server
To configure the HTTP proxy server domain name server (DNS) name, IPv4 address, or IPv6 address,
use the transport http proxy server command.
Syntax Description ip-address
proxy-server-name
port port-number
Defaults
Disabled
Command Modes Call home configuration mode (config-callhome)
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to configure the HTTP proxy server DNS name, IPv4 address, or IPv6 address:
switch# configure terminal
switch(config)# callhome
switch(config-callhome)# transport http proxy server http://www.yoursite.com port 5050
Related Commands Command
transport http proxy
enable
show callhome
transport
Cisco Nexus 7000 Series NX-OS System Management Command Reference
696
transport http proxy server {ip-address | proxy-server-name} [port port-number]
IPv4 or IPv6 address of the proxy server.
DNS name of the proxy server.
(Optional) Specifies the port number. The range is from 1 to 65535. The default
port number is 8080.
Modification
This command was introduced.
Description
Enables Smart Call Home to send all HTTP messages through the HTTP
proxy server.
Displays the transport-related configuration for Smart Call Home.
T Commands
OL-25806-03