System Switchover - Cisco Nexus 7000 Series Reference Manual

S Commands

system switchover

To switch over to the standby supervisor, use the system switchover command.
Syntax Description
This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to switch over to the standby supervisor:
switch# system switchover
switch#
Related Commands Command
show system redundancy Displays the system redundancy status.
OL-25806-03
system switchover
Modification
This command was introduced.
Description
Cisco Nexus 7000 Series NX-OS System Management Command Reference
system switchover
421