Collect Routing - Cisco Nexus 7000 Series Reference Manual

collect routing

collect routing
To configure a routing attribute as a nonkey field and collect the value of the field for a Flexible NetFlow
flow record, use the collect routing command. To disable the use of a routing attribute as a nonkey field
for a Flexible NetFlow flow record, use the no form of this command.
Syntax Description
destination
source
as
peer
traffic-index
forwarding-status
next-hop address ipv4 Configures the next-hop value as a nonkey field and collects information
bgp
Defaults This command is not enabled by default.
Command Modes
Flow record configuration
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0(1)
Cisco Nexus 7000 Series NX-OS System Management Command Reference
82
collect routing {{destination | source} as [peer] | traffic-index | forwarding-status | next-hop
address ipv4 [bgp]}
no collect routing {{destination | source} as [peer] | traffic-index | forwarding-status | next-hop
address ipv4 [bgp]}
Configures one or more of the destination routing attributes fields as a
nonkey field and collects the values from the flows.
Configures one or more of the source routing attributes fields as a nonkey
field and collects the values from the flows.
Configures the destination AS field as a nonkey field and collects the value
in the AS field from the flows.
(Optional) Configures the destination AS number of the peer network as a
nonkey field and collects the value of the AS number of the peer network
from the flows.
Configures the Border Gateway Protocol (BGP) source or destination traffic
index as a nonkey field and collects the value of the BGP destination traffic
index from the flows.
Collects the forwarding status of the packet and triggers the collection of
flows denied by Access Control List (ACL) entries.
regarding the next-hop from the flows.
(Optional) Configures the IP address of the next hop BGP network as a
nonkey field and collects the value of the IP address of the BGP next-hop
network from the flows.
Modification
This command was introduced.
C Commands
OL-25806-03