L Commands
Examples
This example shows how to enable the system capabilities TLV:
switch(config)# lldp tlv-select system-capabilities
switch(config)#
This example shows how to disable the system capabilities TLV:
switch(config)# no lldp tlv-select system-capabilities
switch(config)#
Related Commands
Command
show lldp tlv-select
show lldp dcbx
interface ethernet
OL-25806-03
Description
Displays the LLDP TLV configuration.
Displays the local DCBX control status.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
lldp tlv-select
237