Ip Dscp - Cisco Nexus 7000 Series Reference Manual

I Commands

ip dscp

To configure the differentiated devices code point (DSCP) value of the packets in the Encapsulated
Remote Switched Port Analyzer (ERSPAN) traffic, use the ip dscp command.
Syntax Description dscp_value
Defaults
0
Command Modes config-erspan-src
Supported User Roles network-admin
network-operator
Command History Release
5.1(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to configure the DSCP value of the packets in the ESRSPAN traffic:
switch# configure terminal
switch(config)# monitor session 5 type erspan-source
switch(config-erspan-src)# ip dscp 10
switch(config-erspan-src)#
Related Commands Command
ip ttl
monitor-session
OL-25806-03
ip dscp dscp_value
Value of the DSCP of the packets in the ERSPAN traffic. The range is from 0 to
63.
Modification
This command was introduced.
Description
Configures the IP time-to-live (TTL) value of the ERSPAN traffic.
Enters the monitor configuration mode for configuring an ERSPAN or
SPAN session for analyzing traffic between ports.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
ip dscp
219