Feature Netflow - Cisco Nexus 7000 Series Reference Manual

feature netflow

feature netflow
To globally enable the NetFlow feature, use the feature netflow command. To disable NetFlow, use the
no form of this command.
Syntax Description This command does not have any arguments or keywords.
Defaults
Disabled
Command Modes
Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to enable NetFlow on a Cisco NX-OS device:
switch(config)# configure terminal
switch(config)# feature netflow
switch(config)#
This example shows how to disable NetFlow on a Cisco NX-OS device:
switch(config)# no feature netflow
switch(config)#
Related Commands Command
flow record
show flow record
Cisco Nexus 7000 Series NX-OS System Management Command Reference
176
feature netflow
no feature netflow
Modification
This command was introduced.
Description
Creates a flow record and enters flow record configuration mode.
Displays information about NetFlow flow records.
F Commands
OL-25806-03