Event Storm-Control - Cisco Nexus 7000 Series Reference Manual

event storm-control

event storm-control
To specify an event criteria for an Embedded Event Manager (EEM) applet that is run on the basis of a
storm control event, use the event storm-control command. To remove the storm control event criteria,
use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults None
Command Modes Embedded event manager
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to specify that an EEM applet runs when a storm control event occurs:
switch# configure terminal
switch(config)# event manager applet storm-applet
switch(config-applet)# event storm-control
switch(config-applet)#
Cisco Nexus 7000 Series NX-OS System Management Command Reference
166
event storm-control
no event storm-control
Modification
This command was introduced.
E Commands
OL-25806-03