Diagnostic Stop - Cisco Nexus 7000 Series Reference Manual

D Commands

diagnostic stop

To stop one or more diagnostic tests for a module, use the diagnostic stop command.
Syntax Description
slot
test
test-id
name
all
Defaults None
Command Modes Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to stop one or more diagnostic tests on a module:
switch# diagnostic stop module 6 test all
switch#
Related Commands Command
diagnostic start
OL-25806-03
diagnostic stop module slot test [test-id | name | all]
Slot number. The slot range is from 1 to 10.
Displays the diagnostic test.
(Optional) Test ID. The range is from 1 to 14.
(Optional) Test name. The name can be any case-sensitive, alphanumeric string
up to 32 characters.
(Optional) Displays the diagnostic test for all tests on all modules.
Modification
This command was introduced.
Description
Starts one or more diagnostic tests.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
diagnostic stop
129