Event Gold - Cisco Nexus 7000 Series Reference Manual

event gold

event gold
To specify an event criteria for an Embedded Event Manager (EEM) applet that is run on the basis of a
Generic Online Diagnostic (GOLD) failure event when monitoring one or more modules, use the event
gold command. To remove the GOLD failure event criteria, use the no form of this command.
Syntax Description module
module
all
test name
severity
testing-type
consecutive-failure
cnt
Defaults None
Command Modes
Embedded event manager
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0(1)
Cisco Nexus 7000 Series NX-OS System Management Command Reference
148
event gold module {module | all} test name [severity {minor | moderate | major}] testing-type
{bootup | ondemand | scheduled | monitoring} consecutive-failure cnt
no event gold module {module | all} test name
Specifies that one module or all modules must be monitored:
Note
Number of a specific module to be monitored.
Specifies that all modules are to be monitored.
Specifies the test name of the event criteria.
(Optional) Specifies the event criteria match for the diagnostic result matches
with the GOLD diagnostic error:
minor—Specifies to match to minor GOLD diagnostic errors.
•
• moderate—Specifies to match moderate GOLD diagnostic errors.
• major—Specifies to match major GOLD diagnostic errors.
Specifies the event criteria based on the testing types of diagnostic from GOLD:
bootup—Specifies the diagnostic tests running on system bootup.
•
ondemand—Specifies the diagnostic tests running from CLI after the
•
module is online.
schedule—Specifies the scheduled diagnostic tests.
•
monitoring—Specifies the diagnostic tests that are running periodically in
•
the background to monitor the health of the system.
Specifies the event criteria based on consecutive test failure information from
GOLD.
Modification
This command was introduced.
The module keyword is required to complete the event gold command.
E Commands
OL-25806-03