Cisco Nexus 7000 Series Reference Manual page 212

Nx-os system management command reference
Hide thumbs Also See for Nexus 7000 Series:
Table of Contents

Advertisement

filter (SPAN)
filter (SPAN)
To configure the filters for an Ethernet Switched Port Analyzer (SPAN) session, use the filter command.
To remove the filters, use the no form of this command.
Syntax Description
vlan vlan-range
bpdu
true
false
cos cos-value
dest-mac dest-mac
eth-type eth-value
flow-hash
flow-value
pc-lane port-number (Optional) Specifies a filter based on a member of the port channel.
src_mac
mac-address
trace-route
true
false
Defaults
None
Command Modes
Config-monitor configuration mode (config-monitor)
Supported User Roles
network-admin
VDC-admin
Command History
Release
6.2(2)
Cisco Nexus 7000 Series NX-OS System Management Command Reference
184
filter [vlan vlan-range] [bpdu [true | false]] [cos cos-value] [dest-mac dest-mac] [eth-type
eth-value] [flow-hash flow-value] [pc-lane port-number] [src_mac mac-address] [trace-route
[true | false]]
no filter [vlan vlan-range] [bpdu [true | false]] [cos cos-value] [dest-mac dest-mac] [eth-type
eth-value] [flow-hash flow-value] [pc-lane port-number] [src_mac mac-address] [trace-route
[true | false]]
(Optional) Specifies a filter based on a VLAN range.
(Optional) Specifies a filter based on the bridge protocol data unit (BPDU) class
of packets.
(Optional) Specifies that a filter based on the bridge protocol data unit (BPDU)
class of packets is used.
(Optional) Specifies a filter based on non-BPDU class of packets.
(Optional) Specifies a filter based on the class of service (CoS) in the dotlq
header.
(Optional) Specifies a filter based on a destination MAC address.
(Optional) Specifies a filter based on the Ethernet type.
(Optional) Specifies a filter based on the result bundle hash (RBH) value.
(Optional) Specifies a filter based on a source MAC address.
(Optional) Specifies a filter based on trace-route packets.
(Optional) Specifies a that a filter based on trace-route packets is used.
(Optional) Specifies a filter based on non trace-route packets.
Modification
This command was introduced.
F Commands
OL-25806-03

Advertisement

Table of Contents
loading

Table of Contents