Show Startup-Config Eem - Cisco Nexus 7000 Series Reference Manual

Show Commands

show startup-config eem

To display the Embedded Event Manager (EEM) startup configuration, use the show startup-config eem
command.
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to display the Embedded Event Manager (EEM) startup configuration:
switch# show startup-config eem
!Command: show startup-config eem
!Time: Tue Feb
!Startup config saved at: Thu Jan 21 08:39:42 2010
version 5.0(2)
switch#
OL-25806-03
show startup-config eem
Modification
This command was introduced.
2 22:41:25 2010
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show startup-config eem
657