Show Flow Exporter - Cisco Nexus 7000 Series Reference Manual

Show Commands

show flow exporter

To display the Flexible NetFlow flow exporter status and statistics, use the show flow exporter
command.
Syntax Description name exporter-name
Defaults
Information for all flow exporters configured on the router is displayed.
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines You must have already enabled traffic monitoring with Flexible NetFlow using an exporter before you
can use the show flow exporter command.
This command does not require a license.
Examples This example shows how to display the status and statistics for all of the flow exporters configured on
the router:
switch# show flow exporter
Flow Exporter NFC-DC-PHOENIX:
Export Version 5
Exporter Statistics
Flow exporter timeout:
OL-25806-03
show flow exporter [name exporter-name]
(Optional) Specifies the name of a flow exporter. The name can be any
case-sensitive, alphanumeric string up to 64 characters.
Modification
This command was introduced.
Number of Flow Records Exported 0
Number of Export Packets Sent 0
Number of Export Bytes Sent 0
Number of Destination Unreachable Events 0
Number of No Buffer Events 0
Number of Packets Dropped (No Route to Host) 0
Number of Packets Dropped (other) 0
Number of Packets Dropped (LC to RP Error) 0
Number of Packets Dropped (Output Drops) 0
Time statistics were last cleared: Never
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show flow exporter
477