Transport Http Use-Vrf - Cisco Nexus 7000 Series Reference Manual

T Commands

transport http use-vrf

To configure the virtual routing and forwarding (VRF) instance used to send e-mail and other Call home
messages over the Hypertext Transfer Protocol (HTTP), use the transport http use-vrf command.
Syntax Description vrf-name
Defaults
None
Command Modes Call home configuration
Supported User Roles network-admin
vdc-admin
Command History Release
5.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to configure a VRF to send Call home messages using HTTP:
switch(config)# callhome
switch(config-callhome)# transport http use-vrf Blue
switch(config-callhome)#
Related Commands Command
transport email
mail-server
OL-25806-03
transport http use-vrf vrf-name
Virtual routing and forwarding (VRF) name. The name can any alphanumeric string up
to 255 characters.
Modification
This command was introduced.
Description
Configures multiple SMTP servers as the domain name server (DNS)
names, IPv4 addresses, or IPv6 addresses for Call home.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
transport http use-vrf
697