Show Snmp Host - Cisco Nexus 7000 Series Reference Manual

show snmp host

show snmp host
To display the Simple Network Management Protocol (SNMP) host notification receivers, use the show
snmp host command.
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to display the SNMP hosts:
switch(config)# show snmp host
-------------------------------------------------------------------
Host
-------------------------------------------------------------------
192.0.2.1
-------------------------------------------------------------------
192.0.2.2
Use VRF: Blue
-------------------------------------------------------------------
192.0.2.10
Filter VRF: Red
-------------------------------------------------------------------
Cisco Nexus 7000 Series NX-OS System Management Command Reference
642
show snmp host
Modification
This command was introduced.
Port Version Level Type
33 v1 noauth trap
162 v3 auth trap
162 v3 auth trap
Show Commands
SecName
Comm2
comm3
testCommunity
OL-25806-03