Show Sampler - Cisco Nexus 7000 Series Reference Manual

show sampler

show sampler
To display a NetFlow sampler, use the show sampler command.
Syntax Description
name
sampler-name
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines You can create a sampler to define the NetFlow sampling rate for a flow.
This command does not require a license.
Examples This example shows how to display a NetFlow sampler:
switch(config)# show sampler
Sampler Netflow-Sampler-1:
switch(config)#
Related Commands Command
sampler
Cisco Nexus 7000 Series NX-OS System Management Command Reference
630
show sampler [name] [sampler-name]
(Optional) Specifies a sampler.
(Optional) Sampler name. The maximum number of characters is 32.
Modification
This command was introduced.
mode 1 out-of 1000
Description
Configures a sampler to collect data for a user selected packet ratio to
preserve hardware resources.
Show Commands
OL-25806-03