Cisco Nexus 7000 Series Reference Manual page 637

Show Commands
show ptp port
To display information about the Precision Time Protocol (PTP) port, use the show ptp port command.
Syntax DescriptionT
interface
ethernet
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.2(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to display information about the PTP port:
switch# show ptp port
PTP Port Dataset: Eth7/1
Port identity: clock identity:
Port identity: port number: 1536
PTP version: 2
Port state: Slave
Delay request interval(log mean): 2
Announce receipt time out: 3
Peer mean path delay: 0
Announce interval(log mean): 1
Sync interval(log mean): 2
Delay Mechanism: End to End
Peer delay request interval(log mean): 0
OL-25806-03
show ptp port {interface [ethernet]}
Specifies the interface.
(Optional) Specifies an Ethernet interface.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
0:18:ba:ff:ff:d8: e:17
show ptp port
609