Show Cfs Peers - Cisco Nexus 7000 Series Reference Manual

Show Commands

show cfs peers

To display all peers in the physical fabric, use the show cfs peers command.
Syntax Description
name
application_name
Defaults None
Command Modes
Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.1(2)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display all peers in the physical fabric for the Call Home application:
switch(config-callhome)# show cfs peers name callhome
Scope
-------------------------------------------------------------------------
Switch WWN
-------------------------------------------------------------------------
20:00:00:22:55:79:a4:c1 172.28.230.85
Total number of entries = 1
Related Commands Command
show application_name
session status
show cfs application
OL-25806-03
show cfs peers [name application_name]
(Optional) Displays the name of a specific application.
Modification
This command was introduced.
: Physical-fc-ip
IP Address
switch
Description
Displays the CFS configuration session status for the application, including
the last action, the result, and the reason if there was a failure.
Displays information about applications that are currently enabled to use CFS
distribution.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show cfs peers
[Local]
439