Firmware Upgrade & Backup > Firmware Upgrade From Tftp; Firmware Backup To Http & Backup > Firmware Backup To Http; Firmware Backup To Http & Backup > Firmware Backup To Tftp; Configuration Upgrade & Backup > Configuration Restore From Http - D-Link DXS-1210 Series User Manual

4 Configuration
Figure 4.10 – Tool Menu > Firmware Upgrade & Backup > Firmware Upgrade from HTTP
Firmware Upgrade & Backup > Firmware Upgrade from TFTP
Upgrade firmware by using TFTP. Enter the TFTP IP address, source URL, and select a Destination URL.
Click Upgrade.
Figure 4.11 – Tool Menu > Firmware Upgrade & Backup > Firmware Upgrade from TFTP
Firmware Backup to HTTP & Backup > Firmware Backup to HTTP
To save a backup of the firmware, select the source URL and then click Backup.
Figure 4.12 – Tool Menu > Firmware Upgrade & Backup > Firmware Backup to HTTP
Firmware Backup to HTTP & Backup > Firmware Backup to TFTP
To save a backup of the firmware using TFTP, enter the TFTP server IP address, the source URL, and the
destination URL. Click Backup.
Figure 4.13 – Tool Menu > Firmware Upgrade & Backup > Firmware Backup to TFTP
Configuration Upgrade & Backup > Configuration Restore from HTTP
To restore the Switch from a saved configuration file, select a Source URL, configuration Destination and
click Restore.
Figure 4.14 – Tool Menu > Configuration Upgrade & Backup > Configuration Restore from HTTP
Startup-config: Check the box to enable the startup configuration function.
Configuration Upgrade & Backup > Configuration Restore from TFTP
To load the Switch's configuration from a saved configuration file using TFTP, enter the TFTP server IP
address and source URL, then click Restore.
Note: The Switch will reboot after
restoring the firmware, and all current
configuration will be lost.
Note: The Switch will reboot after
restoring, and all current configurations
will be lost
14
D-Link DXS-1210 Series User Manual