Configuration Backup & Restore; System Log Backup - D-Link DSG-1100-10/ME Manual

D-Link DGS-1100-10/ME User Manual
Configuration Backup & Restore
Allow the current configuration settings to be saved to a file (not including the password), and if necessary,
you can restore configuration settings from this file. Two methods can be selected: HTTP or TFTP.
HTTP: Backup or restore the configuration file to or from your local drive.
Click Backup to save the current settings to your disk.
Click Browse to browse your inventory for a saved backup settings file.
Click Restore after selecting the backup settings file you want to restore.
TFTP: TFTP (Trivial File Transfer Protocol) is a file transfer protocol that allows you to transfer files to a
remote TFTP server. Specify TFTP Server IPv4 or IPv6 Address, and TFTP File Name for the configuration
file you want to save to / restore from. The maximum Telnet Server connection is 4.
Click Backup to save the current settings to the TFTP server.
Click Restore after selecting the backup settings file you want to restore.

System Log Backup

Allow the current logs to be saved to a file (not including the password), and if necessary, you can restore
logs from this file. Two methods can be selected: HTTP or TFTP.
HTTP: Click Backup to save the current log to your local drive.
Figure 4.7 – Tool Menu > Reboot Device
Figure 4.8 – Tool Menu > Configure Backup and Restore
Note: The Switch will reboot after
restoring the saved backup settings are
applied. All current settings will be lost.
Figure 4.9 – Tool Menu > System Log Backup
1 1 7 7